Flex

The ROMER FLEX arm with PC-DMIS is a modular solution combining two different arm sizes in one single equipment, thus allowing the best accuracy/volume ratio.

The exclusive ROMER design allows changing the arm length in less than 2 minutes.

The FLEX 6 axis arm integrates a patented infinite rotation and wireless communication (WBP) with a long life battery for maximum portability and ease of use.

The FLEX line is compatible with PC-DMIS(tm) and with the ROMER suite of software products: G-Pad, G-Tube, G-Surf, G-Scan Light.

The FLEX arm can be equipped with all of the optional sensors and accessories by ROMER. FLEX is available in 10 different configurations, each one combining two arm length.

EQUIPMENT DELIVERED WITH ARM 2000 FLEX:

• An Arm2000 FLEX (2 sizes)
• Romosoft including GDS (interface software)
• A set of 3 contact probes (point, 6 and 15mm ball ø)
• A fixing kit: a repeatable mounting puck, a fixing plate
and c-clamps
• A counterbalance (2 sizes)
• A verification bar
• A transport case
• A Wireless battery pack with WIFI communication
(autonomy :5 hours, Max theoretical range 50m (inside)
and 200m (outside), Li-Ion battery – removable, sound
jack and integrated speaker.

SPECIFICATIONS:

• Temperature operating range : +10°C to +40°C
• Humidity Operating range : 5 % to 90 % non condensing
• Power supply:
Alimentation CA 100 to 240 VAC (±10%), 50/60Hz (±3Hz)
• Electromagnetic compatibility: Compliant with CEM
directive 89/336/EEC, 92/31/EEC, 93/68/EEC
Applicable norms: EN61326(98), EN55022(94) / A1(95),
EN61000-3-2(95) / A1(98) / A2(98) / A14(00), EN61000-3-3(95),
EN61000-4-2(95) / A1(98), EN61000-4-3(96), EN61000-4-4(95),
EN61000-4-5(95), EN61000-4-6(96), EN61000-4-11(94)
• Low voltage: Compliant with low voltage directive
73/23/EEC, 93/68/EEC. Applicable norm: EN61010-1 (2001)